Attach a power source, Turn the camera on, Load a cassette – Canon E 500 User Manual
Page 16: Press the sp/lp button to select the tape speed, Pull out the finder, Turn the grip to the desired position
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
1. Attach a power source.
• See pp. 15-21 for using power sources.
2. Turn the camera on.
• The OPERATE indicator lights up.
_____
• “TAPE” flashes in the viewfinder (see p. 13). ИДИ
3. Load a cassette.
• See p. 23 for loading/unloading cassettes.
• Use an
8
mm video cassette marked with an И (P5 type).
• The camera goes into “record pause mode”. ИДЯ
4. Press the SP/LP button to select the tape speed.
• For best picture quality, select SP.
• For double recording time, select LP.
5. Pull out the finder.
• See p. 26 for using the finder.
6. Turn the grip to the desired position.
• See p. 27 for adjusting the grip.
10
Advertising