Playback procedure, Turn the camera on, Load the cassette – Canon E 500 User Manual
Page 52: Press the ■ (stop) button to select playback mode, Locate the playback start point, Press the play button to start playback, Piayback procedure
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Playback Procedure
1. Turn the camera on.
• The OPERATE indicator lights up.
2. Load the cassette.
• See p. 23 for loading/unloading cassettes.
3. Press the ■ (STOP) button to select playback
mode.
• Playback functions will not operate If you have not pressed the
■ (STOP) button.
4. Locate the playback start point.
• Use the REW or FF buttons to locate the start point or use high
speed search (see p. 49).
5. Press the PLAY button to start playback.
• You can also monitor playback In the viewfinder.
46
Advertising