Press the start/stop button, When recording has ended, remove the cassette, Turn the camera off – Canon E 500 User Manual
Page 17
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
DO
>
o
o
■0
m
J3
>
H
o
z
(/)
REC
*
0:00:23
PAUSE
7. Press the start/stop button.
____
• Recording starts and “REC” appears in the viewfinder. BWl
• The tally lamp flashes rapidly.
• See “ADVANCED OPERATIONS” (pp. 51-75) for information on
making your recordings more effective.
8. Press the start/stop button again to pause
recording. IWil
• Press the start/stop button once again to resume recording.
• See “Record Review” (p. 65) to check your recording.
9. When recording has ended, remove the cassette.
• See p. 23 for loading/unloading cassettes.
10. Turn the camera off.
• The OPERATE indicator goes off.
N otes:
•
The camera automatically turns off if record pause mode lasts more than approximately 7 minutes. To
resume recording, turn the camera on and press the start/stop button.
• Avoid recording near sources of electric or magnetic fields, such as a TV tower, which can cause noise in
the picture or a camera malfunction.
• If the tape speed is changed during recording, the tape will contain noise at that point.
11