Selecting the video channel (european model), Turn the tv on, Turn the camera on – Canon E 500 User Manual
Page 49: Stop) button to select playback, Press the < (play) button to start playback
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
CD
>
w
o
o
"D
m
33
>
in
Selecting the Video Channel (European model)
The video channel means the channel in your area which is not
used by a broadcasting station (channel 30 - 39). If your TV does
not have audio/video input terminals, your TV set and the video
channel selector of the RU-100 RF Unit must be set to the video
channel in order to view playback.
1. Turn the TV on.
2. Turn the camera on.
3. Press the
mode.
(STOP) button to select playback
4. Press the
<
(PLAY) button to start playback.
5. Set the RF unit’s G/l selector using flat-edge
screwdriver.
G: Continental Europe
I: England, South Africa, Hong Kong
• If the G/l selector is not set properly, the picture will appear, but
no sound will be heard.
6. Set the TV and the video channel selector to the
video channel (the video channel selector is
factory-set to CH 32).
• For example, if the video channel in your area is channel 33,
tune the TV to channel 33, then use a flat-edge screwdriver to
set the video channel selector of the RU-100 to CH 33. Adjust it
by turning until the picture is clear.
43