Replacing bulb 59-a, Loosen the screw of the protector, Remove the protector – Canon E 500 User Manual
Page 65: Attach the protector, Tighten the screw, Replacing bulb
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Replacing Bulb 59-
a
Use only Canon Halogen Bulb MHL-5.7 V 4 W
(accessory).
• Before replacing the bulb, turn the power off
and allow sufficient time for the bulb to cool.
1. Loosen the screw of the protector.
2. Remove the protector.
3. Remove the old bulb and insert the
new bulb as shown.
• Do not touch the new bulb with your bare
hands.
• If the bulb Is dirty, wipe it with a soft, clean
cloth.
4. Attach the protector.
5. Tighten the screw.
Warning
Be careful not to touch the bulb during or
immediately after use; it becomes very hot.
Notes:
•
Keep the hot lamp away from flammable or plastic
materials.
• Protect the pop-up light from impact or vibration
during use or the halogen lamp may burn out.
• When attaching new bulb, please note its direction.
>
o
<
>
z
o
m
o
o
T)
m
JJ
>
H
o
z
c/3
59