Canon E 500 User Manual
Page 48
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Q
B
Using a TV without Audio/ Video
Input Terminals
The RU-100 RF Unit is required in order to view
cassettes on a TV which does not have audio/
video input terminals. There are two RU-100
models, one for Europe and one for Australia.
The connection and setting procedures for the
two models differ.
European Model
RU-100
El
Connection Plug
19 G/l Selector
B Video Channel Selector
B FROM ANT. Terminal
B
TO TV Terminal
Coaxial Cable with DIN-Connectors
B
male
19
female
Connection Procedure E^Q
^ 1. Connect the RF Unit to the camera.
2. Attach the aerial cable to the FROM
ANT. terminal, and connect the
female connector to the TO TV
terminal of the RF unit.
• Please note the difference between ‘male’ and
‘female’ type DIN-connectors on the coaxial
cable.
3. Connect the male connector to the
aerial input terminal of the TV.
To View a Regular TV Programme
The RU-100 RF Unit has an automatic signal
selector which selects the signal from the video
camera whenever the camera is connected to the
RF unit and the power is turned on. To view a
regular TV programme, turn the camera off or
disconnect it from the RF unit.
42