Video cassette notes, Video cassette erasure prevention switch – Canon E 500 User Manual
Page 30
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
e
Video Cassette Notes
• Do not leave a cassette in the camera after
use, especially when the camera will not be in
use for a long time.
• There are several holes on the cassette back,
which are used for transferring information. Do
not cover them.
• Do not use cassettes with damaged or spliced
tape or ones that do not meet standards.
Video Cassette Erasure Prevention
Switch
To prevent accidental erasure of recorded
material, slide the switch at bottom of the
cassette to the “SAVE” or “ERASE OFF” position,
as shown.
Returning the switch to the “REC” or “ERASE
ON” position enables recording again.
Refer to the cassette instructions for further
information on erasure prevention.
• “TAPE” flashes in viewfinder if you try to record
on a cassette that has been set for erasure
prevention. Use another cassette or set the
switch to enable recording.
Metal *HGBSI ____________
Standard 8mm MP ИМЯ
О
In the “SAVE” or “ERASE OFF” position:
Erasure Prevention
О In the “REC” or “ERASE ON” position:
Recording Possibie
24