Tape return, Stop) button when playback, Press the tape return button – Canon E 500 User Manual
Page 74: Press the ► (play) button, Tape return i
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Tape Return
Tape return allows you to quickly return to a desired scene on the
cassette.
• The camera does not have a TAPE RETURN button. Use the
wireless controller to operate tape return.
1. During playback, press the COUNTER RESET
button if you come across a scene that you want
to watch again later.
____
• The tape counter resets to 0:00:00.
Press the
finishes.
(STOP) button when playback
3. Press the TAPE RETURN button.
• The tape rewinds and stops automatically when the counter
reading nears 0:00:00.
4. Press the ► (PLAY) button.
• Playback starts at the point where you pressed the COUNTER
RESET button.
68
Notes:
•
Every time you load a cassette, the tape counter automatically resets to 0:00:00. This means that after
recording you can use the tape return to locate the recording start point.
• The tape counter reading is only approximate. Use it as a guide.
• Tape return does not function when the tape counter reading is near 0:00:00.
• Press the ■ (STOP) button to cancel tape return.