Canon Z85 - Manual (Page 69)

Troubleshooting
Even if you think your camera may need repairs, check the
table below first. If your camera still does not function
properly after you have made these checks, bring it to your
nearest Canon service center for repairs.
Problem Cause Remedy
1. The battery 1 The batteries have 1 Change the batteries
check mark expired
doesn't 2 The batteries are 2 Reinsert the batteries
appear inserted with the
wrong poiarity
correctly
2, The shutter t The main switch is 1 Turn the main switch
doesn’t turned OFF ON
release
2 The batteries have
expired
2 Change the batteries
i The film is not
3
Reload the film
inserted properly
correctly
* A finished roll of fiim
4 Remove the fiim and
is loaded in the
camera
load a new roll.
3 Pictures are
1 When the shutter 1 Make sure the AF
blurry
was reieased, the AF
light receptor is not
light receptor was
covered by hair.
covered fingers, etc
2 During self-timer 2 Make sure you are
photography, you
not standing directly
pressed the Shutter
in front of the
Release Mode burton
while standing
immediately in front
of the camera
camera
3 The camera was
3 Press the shutter
moved when the
shutter button was
pushed (Camera
shake)
button lightly
4 ''E" is blinking
This is a self-diagnosis
Press the main switch (it
in the LCD display when reset is the display remains.
panel
necessary take the camera in for
repairs).
I
69