AVer EXR6004-Mini user manual - Manual (Page 16)

10
2.2 Familiarizing the Buttons in Preview Mode
Name Function
(1) Exit Call up the Logout dialog box.
In the logout dialog box, you may do the following:
-
Reboot: To restart the DVR system. It is required to enter the password
- Power Off: To shutdown the DVR system.
- Login: Using different ID to login to DVR system.
- Exit: To close the application.
(2) Split Screen Mode Select from 2 different split screen types to view all the cameras or one camera on a
single screen. It also allows you to switch and view different camera number.
When user is in single screen mode, user can right-click and drag a square on the
area you want to enlarge the view. Right-click on the screen again will return to the
normal view.
(3) Record Start/stop video recording.
(4) EMap Display the map in each area, and the location of camera/ sensor/ relay and the
warning (see also
Chapter 2.2.1 ).
(5) Network Enable/disable remote system access. This feature allows you to access DVR server
from a remote location via internet connection. The default is disabled.
(6) Setup Configure the system settings. (see also Chapter 3 )
(7) PTZ To call out the PTZ control panel(see also Chapter 2.2.2 )
(8) Preview Switch to Preview mode. This allows you to view live camera display.
(9) Playback Switch to Playback mode. This allows you to view the recorded video file. (see also
Chapter 2.3 ).
(10) Status bar Display the recoding date, time and hard disk space of DVR unit.
(11) Camera ID Show the number of cameras that are being viewed. When you are in single screen
mode, click the camera ID number to switch and view other camera.
(12) Snapshot Capture and save the screen shot in *.jpg format.
(13) Event log Show the record of activities that take place in the system. (see also Chapter 2.2.3 )
(14) AutoScan Start/Stop video screen cycle switch.