AVer EXR6004-Mini user manual - Manual (Page 40)

34
3.4 Network Setup
Click Default will back to the factory default value.
(1) Server Name
Assign a name for the DVR unit. Alphabet letters and numbers only.
(2) Transmitting Cameras
Select and click on the camera number in the Transmitting Camera section you want to make it
accessible via internet using PCViewer, Remote Console, CM3000(Gold),PDA Viewer and JavaViewer
(still image). To select all the cameras, enable the ALL check box.
(3) Main Configuration
Set the DVR IP address and Remote Console Port. You need this when accessing DVR server from the
remote location via internet. The DVR system supports dual LAN, user can setup 2 IP address and only
the one has marked Set as default gateway can configure DDNS function. Click Setting to setup IP
setting.
i
The default IP of the DVR server is 192.168.2.2 for LAN1 (lower LAN port in the back of the DVR) and
192.168.3.2 for LAN2 (upper LAN port in the back of the DVR).
- 2 LAN ports cannot set in same LAN segment; it will cause the network connection failure.
- When only using port LAN2, please set IP address of port LAN 1 in different LAN segment from port
LAN 2.