AVer EXR6004-Mini user manual - Manual (Page 35)

29
3.2.1.1 Using Search Device to Connect IP Camera
The Search Device function help user to find the IP cameras on your LAN network that can be detected
by DVR system. User can directly click the IP camera from search result list and connect to the selected
IP camera without to enter any data of IP camera.
1. In preview mode, click Setup > Camera and select the Input is IP camera.
2. Next, click Add IPCam to call out IP camera Settings window.
3. Click Search Device button.
For supported IP camera list, please refer to the IP camera support list on web site
(http://surveillance.aver.com/).
4. In Search Result window, click Search button to start searching IP cameras.
5. After search completing, user can click the IP camera that wants to connect and click OK; the screen
will back to IP Camera Settings window.
6. For connecting AVer series IP cameras, the IP cameras list in red text and these means the IP
camera is can be configured from DVR site. User can select the IP camera and click Active IP button
to configure the IP camera ’s setting; even the IP camera is not in the same IP segment. After selecting
Click Search button to start
searching IP camera on
your LAN network.