AVer EXR6004-Mini user manual - Manual (Page 55)

49
- Enlarge Camera View
Switch to only display video in Preview mode from where the alarm is activated.
a. Select the camera from drop down list to specify which camera video to be enlarged on screen
when the alarm is triggered.
b. Retrieve time: set the waiting duration before system switching back to original Preview mode. If
the retrieve time is un-mark, the alarm video will keep enlarging until user switch back to Preview
mode manually. The retrieve time range is 0~ 600 seconds.
- Relay Output
Set to enable/disable the relay operation when the
alarm is activated and to extend additional time in
second before it stops the relay operation.
1. Next to the Relay Output check box, click Detail.
2. In the Alarm Relay dialog box, select from the
available relay list and in the ON column, set to
enable/disable the relay operation when the alarm is
activated.
3. In the Retrieve time check box, you may
enable/disable to extend the relay operation time
and set the duration in second.
4. Click OK to exit and accept the setting and Cancel
to exit without saving the setting.
- IP Camera Relay
Set to enable/disable the relay operation when the alarm is activated.
- Play Warning Sound
Play alarm sound.