AVer EXR6004-Mini user manual User Manual
Page 33
27
1. IP Setting: Click IP setting to call out IP camera setting window.
2. Click the radio button of Protocol to start setup IP camera.
3. Select the Protocol, Model, Video Format, and Channel of the IP camera.
4. Enter IP address and connecting port in IP Camera Site column.
Search Device: If use doesn
’t know any IP camera protocol, click Search Device button to
find the IP cameras that can be detected on your LAN network; not all IP camera on your LAN
network can be found (see also
).
For supported IP camera list, please refer to the IP camera support list on web site
(http://surveillance.aver.com/).
5. Also, user can choose to enter URL of IP camera to connect an IP camera.
User only can choose use Protocol or URL one at a time;
can’t choose both at the same
time.
6. If the IP camera has authority request, please enable Authentication and enter ID and
Password.
7. Click OK to connect with the IP camera.
Detail: The setting of advanced IP cameras are related to the Intelligent Streaming function in
System setting. Click Detail. Click Default will back to the factory default value.
Stream Setting: user can setup Codec, Resolution, FPS, Bitrate Mode, and Quality Bitrate
It displays
information of
IP camera.