AVer EXR6004-Mini user manual - Manual (Page 51)

45
3.7 Sensor Setting
The I/O device must be installed to use this function.
1. The system automatically detects the I/O device that has connected with DVR system and display on
the drop-down list column. Click the drop-down list and select the sensor that user wants to configure.
2. Enter sensor name in Name column.
3. In the Content section, enter Description of sensor.
4. In the test section, click Test to check the sensor status. Red is high and Green is low.
5. Click OK to exit and accept the setting and Cancel to exit without saving the setting.