Relay setting, 8 relay setting – AVer EXR6004-Mini user manual User Manual
Page 52
Advertising
46
3.8
Relay Setting
The I/O device must be installed to use this function.
1. The system automatically detects the I/O device that has connected with DVR system and display on
the drop-down list column.
2. Enter sensor name in Name column.
3. In the Content section, enter Description of relay.
4. In the test section, click Test to trigger relay. Red is high and Green is low.
5.
Click OK to exit and accept the setting and Cancel to exit without saving the setting.
Advertising