AVer EXR6004-Mini user manual - Manual (Page 22)

16
2.3 Familiarizing the Buttons in Playback Mode
To switch in Playback mode, click Playback button at the lower right corner of Preview mode user
interface
.
Name Function
(1) Split Screen
Mode
Select from 2 different split screen type to playback the recorded video file of all the
camera or one camera on a single screen. When user is in single screen mode, user can
right-click and drag a square on the area you want to enlarge the view. Right-click on the
screen again will return to the normal view.
(2) Progress bar Show the progress of the file being played. You may move the bar to seek at any location
of the track.
When in single screen playback mode, the colors in progress bar have different means.
 Green color: a motion was detected and recorded
 Blue color: is a general (always) recording file and no any event or motion happen
during recording
 Red color: the sensor was triggered while recording
 Black color: no record file at the time period
 Yellow color: the video loss happen while recording
(3) Hour Buttons Select and click to playback the recorded video file on the specific time frame.
The Hour buttons represent the time in 24-hour clock. The blue bar on top of the hour button indicates
that there is a recorded video file on that period of time. While the red bar indicates that you are currently
viewing the recorded video file.
(4) Playback
Control Buttons
From left to right order:
Begin: Move at the beginning of the recorded video file.
Previous: Go back to the previous frame.
Slower: Play the recorded video file at the reduce speed from 64x, 32x, 16x, 8x, 4x, 2x,
1x, 1/2x, 1/4x.
Rewind: Wind back the recorded video file.
Pause: Briefly stop playing the recorded video file.
Play: Play the recorded video file.