AVer EXR6004-Mini user manual - Manual (Page 42)

36
(7) Other Configuration
- UPnP
Enable UPnP function to automatically map the port setting of PCViewer to the router on the local
network. This function is available when the router has enabled the UPNP function.
Assign a port on DVR as an UPnP protocol port. The PCViewer Port is displayed the current
PCViewer port number.
- Enable White List
i
Without any IP address/IP range is assigned in White List table, none of IP address/IP range is
allowed to access DVR when White List function is enabled.
An access permit list for the remote accessing of DVR server. Enter the IP address and click Add.
Or, enter a range of IP address and click Add. To delete the IP from the list, select the IP and click
Delete button. To reset the input, click Clear button.
- Network Bandwidth Limit
By Channel: Set the network bandwidth by each channel.
All: Set the total network bandwidth consumption limit.