Dynojet 250i: Pit Installation Guide - Manual (Page 13)

S P E C I F I C A T I O N S A N D O P E R A T I N G R E Q U I R E M E N T S
Introduction
Version 4 In Ground Model 200iP/250iP Motorcycle Dynamometer Installation Guide
1-3
C ONVENTIONS U SED I N T HIS M ANUAL
The conventions used in this manual are designed to protect both the user and the
equipment.
T ECHNICAL S UPPORT
For assistance, please contact Dynojet Technical Support at 1-800-992-3525, or write
to Dynojet at 2191 Mendenhall Drive, North Las Vegas, NV 89081.
Visit us on the World Wide Web at www.dynojet.com and www.winpep.com where
Dynojet provides state of the art technical support, on-line shopping, 3D
visualizations, and press releases about our latest product lines.
C ONFIRMATION OF C OMPLIANCE T ESTING AND C ERTIFICATION
example of convention description
The Caution icon indicates a potential hazard to the
dynamometer equipment. Follow all procedures
exactly as they are described and use care when
performing all procedures.
The Warning icon indicates potential harm to the
person performing a procedure and/or the
dynamometer equipment.
# RECORD
The Record # icon reminds you to record your
dynamometer and/or eddy current brake (retarder)
number on the inside cover of this manual.
Bold Highlights items you can select on in the software
interface, including buttons and menus.

The arrow indicates a menu choice. For example,
“select File  Open ” means “select the File menu,
then select the Open choice on the File menu.”
Dynojet Model 200iP, 200iPX, 250iP, and 250iPX dynamometers have
been tested to NFPA 79:2002 and UL 508(A) standards and pass the
requirements.
Certificate Number: US72080032.01