ETS-Lindgren FM5004 Field Monitor (Archived) - Manual (Page 40)

LINE 2
• MAX OF PROBE The maximum of the current reading of all
probes attached and the previous samples
for the display-selected probes will display
on line 2.
• AVERAGE OF PROBE The average of the current reading and the
previous samples for the display-selected
probes will display on line 2.
• ANALOG OUT • The readings sent to the analog output
system will display on line 2. The number
displayed will be an average of the
current reading and previous readings.
• The number of previous readings is
determined from the filter size setting in
the Analog Out Setup menu.
• For example, if filter size is set to 10, the
number displayed is an average of the
current reading plus the nine previous
readings.
3-AXIS
The readings for all enabled axes and the combined reading (square root of the
sum of squares) is displayed for the selected probe. Only one probe at a time
may be selected for 3-axis display. If an axis is disabled, only readings for the
enabled axes are displayed, and the combined reading includes only the enabled
axes.
40 | Menu System
Archived 10/19/10