Remote commands – ETS-Lindgren FM5004 Field Monitor (Archived) User Manual
Page 60
Pin
Signal
Data Direction
Description
1
DCD
Input to FM5004
Device Carrier Detect
2
RD
Input to FM5004
Receive Data
3
TD
Output from FM5004
Transmit Data
4
DTR
Output from FM5004
Data Terminal Ready
5
GND NA
Ground
6
NC NA
No
Connection
7
RTS
Output from FM5004
Ready to Send
8
CTS
Input to FM5004
Clear to Send
9
NC NA
No
Connection
A null modem cable or adapter is required to interface the FM5004 to
a standard serial port on a personal computer.
Remote Commands
For system level commands required for IEEE-488.2 compliance, see
The following conventions are used in the remote commands and returned data
syntax:
•
x—A lowercase x represents a numeric value, which may be a voltage
value or a numeral associated with a functional selection.
•
n—A lowercase n represents a channel number (1 through 4)
associated with a system probe.
•
m—A lowercase m represents a mode selection.
60 |
Remote Operation
Archived 10/19/10