ETS-Lindgren FM5004 Field Monitor (Archived) - Manual (Page 81)

L AST E RRORS
Description: Returns the code and a description of the last errors
that have occurred.
Syntax: LERR?
Parameters: Error message (string):
• Up to 10 lines.
The message contains the error code followed by
a description of the error.
Example: To see the last error:
LERR?<LF>
The FM5004 will return:
00:06:53 C1=H Probe Fail–probe did not recover<CR><LF>
If no errors are logged the FM5004 will return:
<CR><LF>’No errors logged.’<CR><LF>
LCD B RIGHTNESS
Description: Sets the LCD backlight level to a specific brightness.
Syntax: LCDB,xx
Parameters: Brightness level (xx):
• Range 0 to 15.
A zero turns off the LCD backlight and a 15 sets
maximum brightness.
Example: To set the brightness to 8:
LCDB,8<LF>
The FM5004 will return:
LCDB,8<CR><LF>
Remote Operation | 81
Archived 10/19/10