Losi LOSA0887 Manual - Manual (Page 33)

3 0
BAG E (Continued)
Step 22. Make sure that the dogbones are in the outdrives (47) before
continuing.
Step 23. Attach the bottom of a rear shock (the longer of the two
shocks) to the right rear arm (118) by snapping the shock end (133)
over the the shock mount swivel ball (134) that is already attached to
the right rear arm (118).
Step 24. Slide a short shock mount bushing (142), large side first, over
the screw (33) on the right side of the rear shock tower.
Step 25. Place the top of the shock body (138) over the shock mount
bushing (142) on the rear shock tower (123) and secure it with a 4-40
locknut (95).
*NOTE: Before attaching the top of the shock, make sure that
the dogbone is in place in the outdrive.
Step 26. Repeat Steps 23-25 for the left rear shock.
Step 27. Insert the shock end (134) of a front shock between the
shock mounting rails of the front suspension arm (48) and line up the
hole in the shock mount swivel ball (133) with the middle hole in the
arm (48).
Step 28. Attach the shock end (134) to the front arm (48) by threading
a 4-40 x 1/2" cap-head screw (31) all the way into the arm (48).
Step 29. Slide a long shock mount bushing (143), large side first, over
the screw (33) on the right side of the shock tower (34).
Step 30. Place the top of the shock body (137) over the shock mount
bushing (143) on the front shock tower (34) and secure it with a 4-40
locknut (95).
Step 31. Repeat Steps 27-30 for the left front shock.
Figure 69
Figure 68
Figure 68
Figure 69
95
142
143
31 95
143
137
95
31
134
48
138 142
33
95
118
134
133