Radio installation, Continued) – Losi LOSA0887 Manual User Manual

Page 54

Advertising
background image

RADIO INSTALLATION

(Continued)

5 1

Step 51. Turn the radio switch off (or unplug the extension wire from
the receiver), and then turn the transmitter off. Make it a habit to
always turn the transmitter on first and off last.

Step 52. Once the throttle and brake linkages are adjusted, replace the
air filter.

Step 48. Move the steering control on the transmitter to the right. The tires on the truck should turn to the right. If not, refer to your radio
manufacturer's instructions for reversing the servos and correct the steering servo.

Step 49. Without touching the transmitter the front tires should be pointing straight. Slight adjustments can be made with the trim adjustments
on the transmitter. If the tires are turned without touching the transmitter, refer to Figure 7A to ensure that the servo horn is installed properly.

Step 50. Move the steering control on the transmitter all the way to the left. The tires should turn all the way to the left. If the tires do not turn
all the way, check the end point adjustments on the transmitter. Check the steering throw to the right as well.

Advertising