Engine installation, Continued) – Losi LOSA0887 Manual User Manual
Page 38
Advertising
3 5
ENGINE INSTALLATION
(Continued)
Step 14. Install the carburetor to the engine as per the instructions
supplied with the engine. The carburetor throttle arm should be on
the left side of the engine as shown. Check that the arm has equal
throw from center. If the arm rotates more in one direction, loosen the
nut securing the arm and re-position the arm.
*NOTE: If your engine comes equipped with a slide valve car-
buretor, the slide ball should be positioned to the left side of the
motor pointing up and forward.
Step 15. Tighten the carburetor locking screws or other mechanism
per the instructions included with your engine.
Figure 79
Figure 79
EQUAL THROW IN
BOTH DIRECTIONS
Figure 79A
Note: Side Exhaust engine shown.
Advertising