Lights and windshield wipers, Replacing bulbs – Mercedes-Benz M-Class 2012 Owners Manual User Manual

Page 117

Advertising
background image

If the new bulb still does not light up, consult

a qualified specialist workshop.
Bulbs and lamps are an important aspect of

vehicle safety. You must therefore make sure

that these function correctly at all times.

Have the headlamp setting checked regularly.

G

WARNING

Bulbs and lamps can be very hot. You should

therefore allow them to cool down before you

change them. Otherwise, you could be burned

if you touch them.
Keep bulbs out of the reach of children.

Otherwise, they could damage the bulbs, for

example, and injure themselves.
Never use a bulb which has been dropped.

Such a bulb may break or even explode and

injure you.
Halogen bulbs are pressurized and can

explode when you change them, particularly

if they are very hot. You should therefore wear

eye protection and gloves when you are

changing them.

Overview: changing bulbs/bulb types

You can change the following bulbs. The bulb

type can be found in the legend.

Halogen headlamps
:

Low-beam headlamp: H7 55 W

;

High-beam headlamp: H7 55 W

=

Parking lamp/standing lamp: W 5 W BV

?

Side marker lamp: WY 5 W

Tail lamp
:

Brake lamp: P 21 W-L

Changing the front bulbs

Removing and installing the cover in the

front wheel arch

You must remove the cover from the front

wheel housing before you can change the

front bulbs.

X

To remove: switch off the lights.

X

Turn the front wheels inwards.

X

Slide up cover : and lift it out.

X

To install: insert cover : again and slide

it downwards until it engages.

Replacing bulbs

115

Lights

and

windshield

wipers

Z

Advertising