Driving and parking, Parking – Mercedes-Benz M-Class 2012 Owners Manual User Manual

Page 158

Advertising
background image

X

Apply the electric parking brake.

X

Shift the transmission to position P.

Using the SmartKey

X

Turn the SmartKey to position 0 in the

ignition lock and remove it.

The immobilizer is activated.

i

If you turn off the engine with the

SmartKey and then remove it from the

ignition lock or open a front door, the

automatic transmission shifts to P

automatically.

Using KEYLESS-GO

X

Press the Start/Stop button (

Y

page 139).

The engine stops and all the indicator

lamps in the instrument cluster go out.

i

If you use the Start/Stop button to switch

off the engine, the automatic transmission

shifts to N automatically. If you then open

one of the front doors, the automatic

transmission shifts to P.

i

In an emergency, the engine can be

turned off while the vehicle is in motion by

pressing and holding the Start/Stop button

for three seconds.

Electric parking brake

General information

i

The electric parking brake performs a

function test at regular intervals while the

engine is switched off. The sounds that can

be heard while this is occurring are normal.

G

WARNING

When leaving the vehicle, always remove the

SmartKey from the starter switch, take it with

you, and lock the vehicle. Do not leave

children unattended in the vehicle, or with

access to an unlocked vehicle. Children could

release the parking brake and/or shift the

automatic transmission out of park position

P, either of which could result in an accident

and/or serious personal injury.

Applying/releasing manually

X

To apply: press handle :.

The red F (USA only) or ! (Canada

only) indicator lamp in the instrument

cluster lights up.

i

The electric parking brake can also be

applied when the SmartKey is removed.

X

To release: pull handle :.

The red F (USA only) or ! (Canada

only) indicator lamp in the instrument

cluster goes out.

i

The electric parking brake cannot be

released unless the SmartKey is in position

1 in the ignition lock or the ignition has

been switched on using the Start/Stop

button.

To ensure that you don't roll backwards when

pulling away on an uphill slope, engage the

electric parking brake (

Y

page 141).

Applying automatically

Your vehicle's electric parking brake is

automatically applied if DISTRONIC PLUS or

the HOLD function bring the vehicle to a

standstill, or are engaged to keep the vehicle

stationary. In addition, at least one of the

following conditions must be fulfilled:

156

Parking

Driving

and

parking

Advertising