Driving and parking, Driving systems – Mercedes-Benz M-Class 2012 Owners Manual User Manual

Page 197

Advertising
background image

ATTENTION ASSIST assesses your level of

fatigue or lapses in concentration by taking

the following criteria into account:

R

your personal driving style, e.g. steering

characteristics

R

driving conditions, e.g. time, driving time

The functionality of ATTENTION ASSIST is

restricted and warnings may be delayed or

not occur at all:

R

if the road condition is poor, e.g. if the

surface is uneven or if there are potholes

R

if there is a strong side wind

R

if you have adopted a sporty driving style

with high cornering speeds or high rates of

acceleration

R

if you predominantly drive at speeds under

50 mph (80 km/h) or over 112 mph

(180 km/h)

R

if you are currently using COMAND or

making a telephone call with it

R

if the time has been set incorrectly

R

in active driving situations, such as when

you change lanes or change your speed

Warning and display messages in the

multifunction display

X

Activate ATTENTION ASSIST using the on-

board computer (

Y

page 232).

Symbol : appears in the multifunction

display.

If ATTENTION ASSIST is active, you will be

warned no sooner than 20 minutes after your

journey has begun. You will then hear an

intermittent warning tone twice, and the

Attention Assist: Drowsiness

Detected

message appears in the

multifunction display.

X

If necessary, take a break.

X

Press a or % to confirm the

message.

On long journeys, take regular breaks in good

time to allow yourself to rest properly. If you

do not take a break and ATTENTION ASSIST

still detects typical indicators of fatigue or

increasing lapses in concentration, you will be

warned again after 15 minutes at the earliest.
ATTENTION ASSIST is reset when you

continue your journey and starts assessing

your tiredness again if:

R

you switch off the engine.

R

you take off your seat belt and open the

driver's door, e.g. for a change of drivers or

to take a break.

Night View Assist Plus

Important safety notes

In addition to the illumination provided by the

normal headlamps, Night View Assist Plus

uses infrared light to illuminate the road. The

Night View Assist Plus camera picks up the

infrared light and displays a grayscale image

in COMAND. The image displayed in

COMAND corresponds to a road lit up by high-

beam headlamps. This enables you to see the

road's course and any obstacles in good time.

If pedestrian recognition is activated,

pedestrians recognized by the system are

highlighted in the Night View Assist Plus

display.

G

WARNING

Night View Assist Plus is only an aid designed

to assist driving. It is not a substitute for

attentive driving. Do not rely solely on the

Night View Assist Plus display. Continue to

look through the windshield. You are

responsible for safety and must drive in

accordance with traffic conditions. You could

otherwise put yourself and others in danger.

Driving systems

195

Driving

and

parking

Z

Advertising