Maintenance and care, Care – Mercedes-Benz M-Class 2012 Owners Manual User Manual

Page 322

Advertising
background image

!

Always maintain a distance of at least

11.8 in (30 cm) between the vehicle and the

power washer nozzle. Information about

the correct distance is available from the

equipment manufacturer.
Move the power washer nozzle around

when cleaning your vehicle.
Do not aim directly at any of the following:

R

tires

R

door gaps, roof gaps, joints etc.

R

electrical components

R

battery

R

connectors

R

lights

R

seals

R

trim elements

R

ventilation slots

Damaged seals or electrical components

can lead to leaks or failures.

Cleaning the wheels
!

Do not use acidic wheel cleaning products

to remove brake dust. This could damage

wheel bolts and brake components.

!

Do not park the vehicle for an extended

period straight after cleaning it, particularly

after having cleaned the wheels with wheel

cleaner. Wheel cleaners could cause

increased corrosion of the brake discs and

brake pads/linings. For this reason, you

should drive for a few minutes after

cleaning. Braking heats the brake discs and

the brake pads/linings, thus drying them.

The vehicle can then be parked.

Cleaning the paintwork

Scratches, corrosive deposits, areas affected

by corrosion and damage caused by

inadequate care cannot always be completely

repaired. In such cases, visit a qualified

specialist workshop, e.g. an authorized

Mercedes-Benz Center.

X

Remove impurities immediately, where

possible, whilst avoiding rubbing too hard.

X

Soak insect remains with insect remover

and rinse off the treated areas afterwards.

X

Soak bird droppings with water and rinse

off the treated areas afterwards.

X

Remove coolant, brake fluid, tree resin,

oils, fuels and greases by rubbing gently

with a cloth soaked in petroleum ether or

lighter fluid.

X

Use tar remover to remove tar stains.

X

Use silicone remover to remove wax.

!

Do not affix:

R

stickers

R

films

R

magnetic plates or similar items

to painted surfaces. You could otherwise

damage the paintwork.

If water no longer forms "beads" on the paint

surface, use the paint care products

recommended and approved by Mercedes-

Benz. This is the case approximately every

three to five months, depending on the

climate conditions and the care product used.
If dirt has penetrated the paint surface or the

paint has become dull, the paint cleaner

recommended and approved by Mercedes-

Benz should be used.
Do not use these care products in the sun or

on the hood while the hood is hot.

X

Use a suitable touch-up stick, e.g. MB

Touch-Up Stick, to correct smaller areas of

paint damage quickly and provisionally.

Matte finish care

If your vehicle has a clear matte finish,

observe the following instructions in order to

avoid damage to the paintwork due to

incorrect care.
These notes also apply to light alloy wheels

with a clear matte finish.

320

Care

Maintenance

and

care

Advertising