Stowing and features, Stowage areas – Mercedes-Benz M-Class 2012 Owners Manual User Manual
Page 294
X
Press release button : of the luggage
holder and pull the strap out in the direction
of the arrow.
X
Place the load between the strap and the
cargo compartment side wall.
X
Using one hand, press locking button : of
the luggage holder.
X
With your other hand, let the strap go slowly
until the load is secured.
X
Make sure that locking button ? on
brackets A is pressed.
This keeps brackets A in place on the
loading rail.
X
To remove: press release button = on
respective bracket A and remove luggage
holder ; by pulling upwards and out.
Telescopic rod
The telescopic rod can be used to secure the
load against the rear seats to prevent it from
moving around.
X
To install: insert one bracket ; into both
the left and the right loading rails and slide
it to the desired position (
Y
page 291).
X
Insert telescopic rod : into brackets ;
and, while doing so, press release
button ? and push the rod downwards
until it engages.
X
Make sure that locking button = on
brackets ; is pressed.
This keeps brackets ; in place on the
loading rail.
X
To remove: press release button ? on
respective bracket ; and remove
telescopic rod : by pulling it upwards and
out.
Stowage well under the cargo
compartment floor
A removable insert under the trunk floor
contains the parts of the EASY-PACK load-
securing kit. The tire-change tool kit is stored
beneath this insert.
X
To open: open the tailgate.
X
Holding the ribbing, press handle :
downwards ;.
Handle : folds upwards.
X
Swing the trunk floor upwards using
handle : until it rests against the cargo
compartment cover.
X
Fold out hook = on the underside of the
trunk floor in the direction of the arrow.
292
Stowage areas
Stowing
and
features