On-board comput er and display s, Menus and submenus – Mercedes-Benz M-Class 2012 Owners Manual User Manual
Page 236
X
Press the : or 9 button to select the
Display Unit Speed-/Odometer
function.
You will see the selected setting:
km
or
miles
.
X
Press the a button to save the setting.
Selecting the permanent display function
The
Permanent Display:
function allows
you to choose whether the multifunction
display always shows the outside
temperature or the speed in km/h (USA) or
mph (Canada).
X
Press the = or ; button on the
steering wheel to select the
Settings
menu.
X
Press the : or 9 button to select the
Instr. cluster
submenu.
X
Press the a button to confirm.
X
Press the : or 9 button to select the
Permanent display
function.
You will see the selected setting
Outside
Temperature
or
Speedometer [km/h]:
.
X
Press the a button to save the setting.
Lights
Switching the daytime running lamps on/
off
This function is not available in Canada.
If you have activated the
Daytime Running
Lights:
function and the light switch is in the
c or à position, the daytime running
lamps are switched on automatically during
the day when the engine is running.
In the dark, the following also light up:
R
the low-beam headlamps
R
the parking lamps
R
the tail lamps
R
the license plate lamp
R
the side marker lamps
X
Press the = or ; button on the
steering wheel to select the
Sett.
menu.
X
Press the : or 9 button to select the
Lights
submenu.
X
Press the a button to confirm.
X
Press the : or 9 button to select the
Daytime Running Lights:
function.
You will see the selected setting:
Enabled
or
Disabled
.
X
Press the a button to save the setting.
Switching Adaptive Highbeam Assist on/
off
X
Press the = or ; button on the
steering wheel to select the
Sett.
menu.
X
Press the : or 9 button to select the
Lights
submenu.
X
Press the a button to confirm.
X
Press : or 9 to select the
Adaptive Highbeam Assist:
function.
You will see the selected setting:
Enabled
or
Disabled
.
X
Press the a button to save the setting.
Setting the brightness of the ambient
lighting
X
Press the = or ; button on the
steering wheel to select the
Settings
menu.
X
Press the : or 9 button to select the
Lights
submenu.
X
Press the : or 9 button to select
Ambient light
.
You will see the selected setting.
X
Press the a button to confirm.
X
Press the : or 9 button to adjust the
brightness to any level from
Off
to
Level
5
(bright).
X
Press the a or % button to save the
setting.
234
Menus and submenus
On-board
comput
er
and
display
s