Mercedes-Benz M-Class 2012 Owners Manual - Manual (Page 239)

wheel when the easy-entry/exit feature is
activated.
To stop steering wheel movement, move
steering wheel adjustment lever or press one
of the memory position buttons.
Do not leave children unattended in the
vehicle, or with access to an unlocked vehicle.
Children could open the driver's door and
unintentionally activate the easy-entry/exit
feature, which could result in an accident
and/or serious personal injury.
X Press the = or ; button on the
steering wheel to select the Sett. menu.
X Press the : or 9 button to select the
Convenience submenu.
X
Press the a button to confirm.
X Press the : or 9 button to select the
Easy Entry/Exit function.
You will see the selected setting: Enabled
or Disabled .
X Press the a button to save the setting.
Switching the belt adjustment on/off
For further information on belt adjustment
(
Y
page 52).
X
Press the = or ; button on the
steering wheel to select the Settings
menu.
X Press the : or 9 button to select the
Convenience submenu.
X Press the a button to confirm.
X Press the : or 9 button to select the
Belt Adjustment function.
You will see the selected setting: Enabled
or Disabled .
X Press the a button to save the setting.
Switching the Fold in mirrors when
locking function on/off
If you switch on the
Fold Mirrors in when
Locking function, the exterior mirrors fold in
when you lock the vehicle. If you unlock the
vehicle and then open the driver's or front-
passenger door, the exterior mirrors fold out
again.
If you have switched the function on and you
fold the exterior mirrors in using the button
on the door (
Y
page 103), they will not fold
out automatically. The exterior mirrors can
then only be folded out using the button on
the door.
X Press the = or ; button on the
steering wheel to select the Sett. menu.
X Press the : or 9 button to select the
Convenience submenu.
X
Press the a button to confirm.
X Press the : or 9 to select the Fold
Mirrors in when Locking: function.
You will see the selected setting: Enabled
or Disabled .
X Press the a button to save the setting.
Resetting to factory settings
For safety reasons, the Daytime Running
Lights: function in the Lights submenu is
only reset when the vehicle is stationary.
X Press the = or ; button on the
steering wheel to select the Settings
menu.
X Press the : or 9 button to select the
Factory Setting submenu.
X Press the a button to confirm.
The Reset All Settings? message
appears.
X
Press the : or 9 button to select
No or Yes .
X Press the a button to confirm the
selection.
If you select Yes , the multifunction display
shows a confirmation message.
Menus and submenus
237
On-board
computer
and
displays
Z