Stowing and feat ures, Features – Mercedes-Benz M-Class 2012 Owners Manual User Manual

Page 301

Advertising
background image

Possible causes of malfunction:

R

the on-board power supply is not within a

permissible volt range.

R

the temperature of the DC/AC converter is

temporarily too high.

R

some small electronic devices have a

constant nominal power of less than

150 W, but a very high inrush current.

These devices will not work. If you connect

such a device, 115 V power socket : will

not supply it with power.

If indicator lamp ; still does not light up,

contact a specialist workshop, e.g. an

authorized Mercedes-Benz Center.

mbrace

Important safety notes
!

A license agreement must exist in order

to activate the mbrace service. Ensure that

your system is activated and ready for use,

and press the ï MB Info call button to

register. If any of the steps mentioned is

not carried out, the system may not be

activated.
If you have questions about the activation,

contact one of the following telephone

assistance services:

R

USA: Mercedes-Benz Customer

Assistance Center under

1-800-FOR-MERCedes

(1-800-367-6372) or 1-888-990-9007

R

Canada: Customer Service at

1-888-923-8367

Shortly after successfully registering with the

mbrace service, a user ID and password will

be sent to you by post. You can use this

password to log in to the mbrace section

under "Owners Online" at http://

www.mbusa.com

20

.

The mbrace system is available if:

R

it has been activated and is operational.

R

the corresponding mobile phone network

is available for transmitting data to the

Customer Center.

R

a service subscription is available.

R

the starter battery is sufficiently charged.

i

Determining the location of the vehicle on

a map is only possible if there is sufficient

GPS reception and the vehicle position can

be forwarded to the Customer Center.

The mbrace system

The mbrace system provides different

services, e.g.:

R

automatic and manual emergency call

R

Roadside Assistance call

R

MB Info call

To adjust the volume during an mbrace call,

proceed as follows:

X

Press the W or X button on the

multifunction steering wheel.

or

X

Use the volume controller of the audio

system/COMAND.

You can find further information and a

description of all available features under

"Owners Online" at http://

www.mbusa.com

21

.

System self-test

After you have switched on the ignition, the

system carries out a self-diagnosis.

20

USA only.

21

USA only.

Features

299

Stowing

and

feat

ures

Z

Advertising