Rice Lake Ishida IGX & IGB Series - Service Manual - Manual (Page 38)

Manual No. 085-3435-07 37/45 IGB/IGX Series (Overseas Specifications) Service Manual
Chapter 4 Maintenance
4.1 Disassembly Procedure for Display Unit
Disassembly procedure
1 If batteries are being used, make sure to remove them, or when using an AC adapter,
extract the cable from the power outlet. (IGB Series only) When using AC power, make
sure to extract the cable from the power outlet. (IGX Series only)
2 Remove the two angle-adjusting knobs.
3 Remove the Void Seal covering the sealing screw hole.
4 Remove the 8 screws (including the sealing screw mentioned above) that hold the front and
rear cases together.