SINGER 7258 STYLIST Instruction Manual - Manual (Page 14)

14
CONVERTING TO FREE-ARM SEWING
Your machine can be used either as a flat- bed or as a free-
arm model.
With the extension table in position, it provides a large working
surface.
To remove the extension table, hold it firmly with both hands
and pull it off to the left as shown. To replace, slide the
extension table back into place until it clicks.
With the extension table removed the machine converts into
a free-arm model for sewing children’s clothes, cuffs, trouser
legs, and other hard-to-reach places.
LARGE EXTENSION TABLE
To place onto the machine, lift the supporting leg of the
extension table, and slide the table into place while fitting the
guide pins A, B, C and D into machine as illustrated.
C
D
B
A
Extension table
Base de extensión
Plateau de rallonge
Supporting leg
Pata de soporte
Pied de support