Functions of operation switch panel – SINGER XL-550 FUTURA Instruction Manual User Manual

Page 30

Advertising
background image

30

1

2

3

4

6

7

FUNCTIONS OF OPERATION SWITCH

PANEL

1. TACKING STITCH MODE BUTTON

Press Tacking Stitch and the sewing machine makes 4

tiny fixing stitches to tie off the sewing on all patterns. Press

START/STOP to sew.

Press Tacking Stitch button when the machine is stopped

so tacking stitch will be activated, the position of the tacking

stitches will be at the exact spot in the pattern where the

Tacking Stitch button is pushed. When the function is

activated, the LED indicator next to the button is lit red.

2. THREAD CUTTER

Press Thread Cutter to automatically cut the top and bobbin

threads.

3. NEEDLE STOP POSITION SELECTOR BUTTON

When the machine is turned on, needle is set at its up-stop

position with upper LED lamp lit. When the button is pushed,

needle is set at its down-stop position with lower LED lamp

lit. Push it again and it will return to its up-stop position with

upper LED lamp lit.

4. REVERSE STITCH BUTTON

Reverse sewing is carried out by pushing the reverse stitch

button. The machine will sew 4 stitches in reverse and stop.

5. START/STOP BUTTON

When the Start/Stop button is pushed, the machine starts

slowly, and when the button is pushed once more, the

machine stops.
However, when foot control is plugged, the Start/Stop button

will be inactive.

6. LED INDICATOR

Green light indicates machine is ready to start.

Red light indicates machine is operating.

Flashing red light indicates a problem or an error.

* Flashing for 2 - 3 seconds shows that an incorrect

operation was made.

* Continuous flashing indicates that the machine

malfunctions.

7. SPEED CONTROL LEVER

Sliding the lever sets desired sewing speed. When foot control

is used, the lever serves as a top speed limiter.

5

Reverse stitch function

for straight and zigzag

stitches
Fonction couture

arrière pour les points

droits et zigzags
Función de costura

hacia atrás para

costuras rectas y

zigzag

Tacking stitch function

for tie-off of other

stitches
Fonction de point

de faufilage pour la

jonction avec d’autres

points
Función de remate

para terminación de

otras puntadas.

Advertising
This manual is related to the following products: