Ladder stitch, Criss-cross stitch, Sewing on a button – SINGER XL-550 FUTURA Instruction Manual User Manual

Page 50: Fishbone stitch

Advertising
background image

50

72

82

73

77

90

LADDER STITCH

The Ladder stitch is primarily used for drawn thread

hemstitching. It can also be used for sewing over thin tape in

an opposite or same color. Place the stitch in the center and a

special effect will be obtained for decoration.

Another use for the ladder stitch is couching over narrow

ribbon, yarn or elastic.

For drawn thread work, choose a medium to heavy weight

linen-type fabric. After sewing, draw the thread out from within

the ladder for an open, airy appearance.

NOTE: Be sure to sew accurately along the grain line, if you

wish to draw out threads.

CRISS-CROSS STITCH

Used to sew and finish stretch fabrics or for decoration

especially of borders.

SEWING ON A BUTTON

Position your fabric and button under the presser foot. Lower

presser foot. Turn the hand wheel counter clockwise (toward

you) to make sure the needle clears both the left and right

openings of the button. Adjust width if required. Sew 10

stitches across.
If a shank is required, place a darning needle on top of the

button and sew over top of it.

SETTINGS :Presser foot - Button sewing foot

:Feed dog control -

Helpful Hint: To secure thread, pull both threads to

the backside of the fabric and tie together.

FISHBONE STITCH

Use to create decorative borders and for embroidery.

Advertising
This manual is related to the following products: