Canon C3500 User Manual
Page 101
Chapter 4
Sending Faxes With the MultiPASS C3500
4-5
❍ Press the one-touch speed dialing button (1 through 6)
assigned to the number you wish to fax to; the name
assigned to that button is displayed.
OR
❍ Press
CODED DIAL
and enter the appropriate two-digit
coded speed dialing code.
❍ If a number is not registered for the button or codes, the
LCD displays
NO TEL #
message. Make sure you pressed
the correct button or entered the correct code and that
the number you want to dial is entered correctly.
❍ If you make a mistake, press
STOP
. Then press the correct
one-touch speed dialing button or press
CODED DIAL
and
re-enter the code.
❍ If you do not press
START/COPY
within five seconds, the
MultiPASS starts sending your document automatically.
❍ If the
ALARM
light is flashing for any reason, correct the error
and press
STOP
. You may need to open the operator panel to
remove the document from the ADF (see page 10-3).
DIALING
Press START/COPY.
CCSI/MKT
CANON FAX BACK
Use automatic
dialing.
Sending Faxes