Canon C3500 - Manual (Page 104)

4-8 Sending Faxes With the MultiPASS C3500 Chapter 4
To Cancel Automatic Redialing
To cancel automatic redialing, press the STOP button. However, you
cannot cancel redialing while the LCD displays AUTO REDIAL (the unit is
waiting to redial). In this case, wait until dialing begins and then press
STOP to cancel redialing. The MultiPASS asks you to confirm:
To cancel the redialing, press * . The MultiPASS beeps and the LCD
displays:
The unit then prints an error report:
Resending a Fax After an Error
If you get an error while sending a fax from memory, the MultiPASS can
resend it to the same destination without having to rescan it. To do this,
the On Error Resend option must be set in the Advanced: Send Fax
dialog box of the MultiPASS Desktop Manager. See page 8-5 for details.
You can also set how much of the fax is sent again:
❍ The entire document (All Pages)
❍ The first page of the document, the page on which the error
occurred, and all following pages (Error & First Pages)
❍ The page on which the error occurred and all pages following the
error (Error Pages)
N
The fax is erased from memory after it is successfully sent or after the
resending fails.
PRINTING REPORT
TX/RX NO. XXXX
TX/RX CANCELLED
YES = (*) NO = (#)