Canon C3500 - Manual (Page 103)

Chapter 4 Sending Faxes With the MultiPASS C3500 4-7
❍ If there is no group registered under the one-touch speed
dialing button or the two-digit code, the LCD displays the
NO TEL # message. Make sure you entered the correct
number and that the group has been registered correctly
to a speed dial code. (See page 8-13.)
❍ If you make a mistake when dialing, press
STOP . You can
then try again.
Redialing
Manual
To start dialing again, just press REDIAL . The MultiPASS redials the
previous number you dialed with the numeric buttons. Make sure the
document is in the ADF.
Automatic
The MultiPASS automatically redials if the first attempt at sending fails
(for example, if the line is busy). The unit redials twice, and the time
between redials is two minutes. (These are the default settings.) The
LCD displays
AUTO REDIAL and the transaction number while the
MultiPASS is redialing.
If the MultiPASS fails to make a connection after the last redial, it
beeps. The LCD displays
BUSY/NO SIGNAL ; try sending again later.
You can change the number of redials (retries) and the time between
redials. The redialing options are set in the Send Fax dialog box of the
MultiPASS Desktop Manager; see page 8-4.
BUSY/NO SIGNAL
TX/RX NO. XXXX
AUTO REDIAL
Sending Faxes