Canon C3500 - Manual (Page 217)

Chapter 8 Setup and Other Utilities in the Desktop Manager 8-5
Fax Information
You can specify the following information that displays as the header for
a PC fax: your name, company name, and fax number. Initially, you set
up this information when you installed the Desktop Manager.
Phone Line
You can specify the dialing method the MultiPASS printer will use:
touch tone or rotary pulse. You also specify any prefix used to access an
outside phone line (usually 9).
Retries
You can specify the number of retries the system should attempt when
sending a fax transmission, and the length of time between each retry.
Report
You can specify whether or not you want a report to print with each fax
transmission (Every trans.), or only when there is an error (Only
Errors). You can also specify if you want an image of the first page of the
fax included in the report. (The report prints the image for plain paper
faxes only, not for PC faxes.)
Restoring the Default Settings
If you want to restore the option default settings after making changes,
click Use Defaults.
Setting Up Advanced Send Fax Options
You can change the following options by clicking Advanced on the Send
Fax tab.
Setup and Utilities Desktop Manager