V.I.O. Stream - Manual (Page 10)

STREAM User Manual
10
3. Install the NP-120 battery included with the STREAM into the battery mount.
• Squeeze the two latches on the battery end cap. See pictures below.
• Remove the cover and install the battery.
Because of the seal, the hatch may stick slightly. This is normal. Excessive force is not required.
Check to see that the latches are unlatched if it feels too tight.
• Replace the cover, and ensure the latches are back into place.
Download and Install a supported video player
The STREAM has been tested with several video players for streaming. Two of these are VLC and KM Player. Below
are instructions for installing these two players. Both are free video players. Any video player supporting RTSP
should work with the STREAM for streaming and any video player supporting .mov or .mp4 video files with H.264
video and AAC audio codec support should work for video playback. We have used the STREAM mainly with these
players so your mileage may vary. Examples are given using VLC or KM Player. You will need to download and
install a video player to work with your STREAM.
VLC
Download and install VLC for Windows users: http://www.videolan.org/vlc/index.html
Download and install VLC for the Mac: http://www.videolan.org/vlc/download-macosx.html
KM Player
Download and install KM Player from:
http://www.kmpmedia.net