V.I.O. Stream - Manual (Page 67)

STREAM User Manual
67
Comparison of STREAM Video Formats
Format Resolution
(Pixel Size of Frame)
Frame Rate
(per second)
Best For
1080p30 1920 wide X 1080 high 30 Highest quality HD video when displayed on a high
resolution, high quality monitor
1
1080p25 1920 wide X 1080 high 25 Frame rate compatibility with European broadcast standards
1080p24 1920 wide X 1080 high 24 Frame rate compatibility with standard cinematography
720p60 1280 wide X 720 high 60 High quality HD video with the option for smooth slow
motion playback
2
720p30 1280 wide X 720 high 30 High quality HD video with somewhat reduced file size.
720p50 1280 wide X 720 high 50 Frame rate compatibility with European broadcast standards
720p25 1280 wide X 720 high 25 Frame rate compatibility with European broadcast standards
Table Notes
1
1080p is higher resolution and, under identical conditions will generally produce a slightly sharper picture,
but conditions are seldom identical and almost never ideal. Depending on the type of television receiver or
computer screen on which the video is played back, room lighting, viewing distance from the screen, and
other factors, the difference in picture quality between 1080p and 720p may or may not be significant or even
detectable. It’s best to try it and see.
2 On the STREAM, 720p60 is recorded at 60 fps and 720p50 is recorded at 50 fps for compatibility with
European broadcast standards which allows clips recorded this way to be played back in smooth slow motion,
and for action filming these will often be the format of choice. Because, on the STREAM, 720p60 records twice
as many frames as 1080p30 and 720p50 records twice as many frames as 1080p25, the resulting file sizes in
these two situations are roughly the same.
Understanding the V.I.O. STREAM Video Record Modes
The STREAM supports three video Record Modes: Clip, Loop, and Loop & Forward.
• Clip works like a regular video recorder. After you start recording, the STREAM records continuously
until you stop recording, and what you’ve recorded is stored in a file, called a “clip” on the Micro
SDHC card.
• Loop allows you to select what action to record and save, without the need to be constantly starting
and stopping the recorder. To use the Loop method you must set Record Mode to Loop and the
looptime to an interval that is appropriate for your situation (more on that in a moment.) These are
set using settings.
• Loop and Forward works like Loop, except that once you’ve captured the first Loop clip by sending
the tag command, the recorder saves the previous segment plus all of the video from that point until
you stop recording. The length of this Loop or pre-event video is determined by the loopforwardtime
setting.