V.I.O. Stream - Manual (Page 47)

STREAM User Manual
47
Upload and/or delete files using a USB connection:
• Connect the recorder to a USB port on the computer using the USB end cap and cable included
with the STREAM.
• If the STREAM recorder is powered down, power it up.
• Use the Web Programmable HTTP/XML interface to send the mass storage device mode command
to the STREAM (<ip address>/api/system/msd)
• On a Mac, the recorder will appear in the Finder as an external drive.
• On a Windows PC, in Windows Explorer, the STREAM will appear as a removable disk under My
Computer.
• Once the recorder is connected to your computer, you can transfer files from the recorder to your
computer, or delete files on the Micro SDHC card in the same way you would transfer or delete
files on any external drive such as a CD, DVD, or backup drive.
• NOTE: If the Micro SDHC card has no label, it will appear in the Finder or Windows Explorer as “NO
NAME”, “UNKNOWN DEVICE”, or something similar. If the Micro SDHC card has a volume label,
that label will appear as the name of the device. The Micro SDHC card provided with the STREAM
is formatted with the volume label “Stream”.
• Note: If you are using a Mac, when you delete files, you must be certain to also empty the trash.
On a Mac deleted files are left in place and marked as being in the trash. Empty Trash is required
to physically remove the files from the Micro SDHC card.
Once the video files are on your computer, they can be treated like any other video files.
• They can be viewed using any suitable video player that runs on your system.
• They can be edited, compiled, and/or resized into your own custom videos.
• They can be burned onto CD’s or DVD’s.
• They can be uploaded to YouTube or any other video sharing site on the Internet.
Delete video clips and still photos from the recorder
You can delete video clips and still photos from the Micro SDHC card without removing the card.
Delete video clips and still photos using the Web Programmable HTTP/XML interface
To delete clips on the STREAM, the STREAM must be powered up.

If the STREAM is not powered up, press the power button for 1-2 seconds to power it up.

It is best to be in Standby mode. This can be done by stopping any recording or streaming in progress.
This is done using the following commands:
 <ip address>/api/record/stop
 <ip address>/api/stream/stop

To get a list of files on the Micro SDHC card, use the Web Programmable HTTP/XML interface to send
the <ip address>/api/record/files command. This command will return a list of files.
 Use the Web Programmable HTTP/XML interface to delete a file. This command would look like <ip
address>/api/record/file/V0000000.mp4/delete.
Remote Control of the V.I.O. STREAM
If you are using more than one STREAM system in the same area, at the same time you will need to ensure
that your SSID is different for each camera.
You may use the 802.11 Wi-Fi interface to send commands to the STREAM using the Web Programmable
HTTP/XML interface. This