V.I.O. Stream - Manual (Page 41)

STREAM User Manual
41

Send the Restore to default command through the Web Programmable HTTP/XML interface, by using
the <ipaddress>/api/system/defaults command.
Operating modes
The STREAM operates in several different modes, depending upon the function being performed. Because this
manual refers to these modes frequently, it’s worthwhile to review what they are and what they’re used for.
Stream Mode is for viewing the video through the RTSP interface through a USB IP address or through a
802.11 Wi-Fi IP address to view the video stream.
Record Mode is for recording video or for setting up the recorder prior to recording.
Stream and Record Mode is for streaming and recording simultaneously as above.
Standby Mode is for adjusting the STREAM settings.
Mass Storage Device Mode is for uploading files to a computer via the USB port.
Other than knowing that they exist, the important thing to know about operating modes is that the STREAM
can operate in only one mode at a time. This means that in most cases, you cannot adjust settings while
recording or view video clips while compiling a highlight clip. There are a few settings, such as exposure zone,
exposure time, noise filter, sharpener, and microphone settings that can be adjusted while recording or
streaming.