V.I.O. Stream - Manual (Page 38)

STREAM User Manual
38
The System tab allows the user to set or clear the user id or password, allows the time to be syncronized, allows
the user to restore to default settings, allows the user to format the SD card, power down the camera remotely,
set an idle timer on the camera for shutdown, and provides a general Custom API command area that allows you
to type in special commands that are in the API document but may not have a dedicated link or button.
This tab allows the USB IP Address and subnet to be changed. It is important to note that the Subnet and IP
Address must be sent as a pair, with the subnet being sent first. This tab accomplishes this by providing the apply
button for these commands. Once this command is sent, it is important to note that all other commands from this
html page will no longer work until the camera is rebooted and the html web page is accessed through the new
USB address.
The API Links tab is a convenient way to look at overall status for the whole camera, look at the sensor status if
more in depth issues are being evaluated, or try presets. Many of these links are buttons on other pages, and in
general, other tabs should be used for most purposes.