Flight level, Enable/disable pop-up – BendixKing AV8OR User Manual
Page 163
Honeywell Bendix/King AV8OR Handheld User’s Guide
D200803000008 Traffic
Function
Rev 5 Mar 2012
Page 2-123
©
Honeywell International Inc. Do not copy without express permission of Honeywell
Flight Level
Tap the
FLIGHT LEVEL
soft key to change the altitude labels above
the targets from altitude above or below the target (100
ft
increments) to the altitude of target above sea level (100
ft
increments)
Enable/Disable Pop-UP
To enable traffic alerts pop-ups, tap the
ENABLE POP_UP
soft key
to display the following pop up window, as shown in the figure below.
Figure 2-173: Traffic page – Enable Pop-Up
Tap the
OK
soft key to accept the change and return to the Traffic
page.
Tap the
CANCEL
soft key to cancel the change and return to the
Traffic page.
When the Traffic Alerts Pop-up is enabled, AV8OR displays the
Traffic Page whenever an alert is given.
A traffic alert symbol
is also displayed in the Status window.
“
ALRT”
flashes on and off to draw attention to the Traffic Alert.