Figure 2-45: map – airport filter – BendixKing AV8OR User Manual
Page 80
Honeywell Bendix/King AV8OR Handheld User’s Guide
VFR Moving Map Function
D200803000008
Page 2-40
Rev 5 Mar 2012
©
Honeywell International Inc. Do not copy without express permission of Honeywell
position directly to the selected airport. The new Direct-To course is
displayed on the map.
Tap the
AIRPORT FILTER
soft key to configure the airport filter by
setting the minimum runway length and surface requirements. The
filter will not allow airports below the minimum requirements to be
displayed in the list.
Figure 2-45: Map – Airport Filter
Double tap on the
Minimum length
selection to display a numeric
keypad to enter the minimum length.
The
minimum runway length will be rounded to the nearest hundred feet.
Double tap on the
Required surface
selection to select the type of
surface for the airports you want to filter.
Any
or
Hard Only
can be selected for the required runway surface.
Tap the
DONE
soft key to accept the changes.
Only airports that match the filter conditions will now show in the
Nearest Airports window.