BendixKing AV8OR - Manual (Page 85)

Honeywell Bendix/King AV8OR Handheld User’s Guide
D200803000008 VFR Moving Map Function
Rev 5 Mar 2012 Page 2-45
© Honeywell International Inc. Do not copy without express permission of Honeywell
The required bank angle to follow the arc will normally be between 3°
and 25° depending on the aircraft speed and the amount of course
change.
DIRECT-TO NAVIGATION
Direct-To Navigation lets the user set a course line from his current
position to any other position. Direct-To Navigation can be done with
the methods that follow:
•
Create a Direct-To course from the Map.
•
Create a Direct-To course from the keyboard entry.
•
Re-center the aircraft when Direct-To is already enabled
•
Bypass a WPT with a flight plan active
•
Enter a new WPT with a flight plan active.
Create a Direct-To course from the Map
Pan and zoom in/out on the map to find the NAVAID point you want
to set a course to. Tap on the NAVAID point to show its name, more
detail information about the NAVAID point is shown by tapping the
MORE INFO soft key, as shown in the figure below.
Figure 2-51: Map – Select a NAVAID
Tapping the PTR MENU soft key, on the right side of the screen,
shows the soft key.