BendixKing AV8OR - Manual (Page 190)

Honeywell Bendix/King AV8OR Handheld User’s Guide
System Setup Function D200803000008
Page 2-150 Rev 5 Mar 2012
© Honeywell International Inc. Do not copy without express permission of Honeywell
1500ft, 2000ft, 2500ft, 3000ft, 4000ft, 5000ft, 6000ft, 7000ft,
8000ft, 9000ft and Maximum.
The Point , Line , Airspace and Overlay pages have the following
four columns:
•
Feature – Feature Description
•
Icon/Style – A graphical representation of the Feature
•
Max – The maximum range that the feature will show on the
map. If the range on the selected map page is set higher
than the Max setting, the feature does not show on the map
page.
•
Label - The maximum range that the label for the feature will
show on the map. If the range on the selected map page is
set higher than the Label setting, the label does not show on
the map page.
The ALL MAPS soft key copies the settings of the features on
the current tab to all available maps.
The RESET VALUES soft key resets the options on the page to
the default value for each feature.
The CHANGE MAP soft key displays the list of map layers as
shown in the figure below. Select the desired map or chart and
then tap the
SELECT soft key to select that layer and return to
the Map Features page.
Figure 2-198: Map System Setup -- Select Map Layer
Tapping the Point tab displays the Point Feature Setup screen,
as shown in the figure below .